Skip to main content
Share, archive, and preserve your research data to improve quality of research
Metrics
95,842 Downloads
Featured Dataverses

In order to use this feature you must have at least one published dataverse.

Publish Dataverse

Are you sure you want to publish your dataverse? Once you do so it must remain published.

Publish Dataverse

This dataverse cannot be published because the dataverse it is in has not been published.

Delete Dataverse

Are you sure you want to delete your dataverse? You cannot undelete this dataverse.

Find Advanced Search

1 to 10 of 43 Results
Nov 15, 2018 - Artikel Jurnal Dataverse
Prifiharni, Siska; Perdana, Hadi; Romijarso, Toni B; Adjiantoro, Bintang; Juniarsih, Andinie; Mabruri, Efendi, 2018, "The Hardness and Microstructure of The Modified 13Cr Steam Turbine Blade Steel in Tempered Conditions", https://hdl.handle.net/20.500.12690/RIN/HXVD6X, RIN Dataverse, V2
Martensitic stainless steels were usually used for turbine blade. Their properties can be improved in various ways, such as by heat treatment. This paper reports the influences of tempering temperature on hardness and microstructure of the modified 13Cr martensitic stainless stee...
Oct 25, 2018 - Prosiding Dataverse
Anwar, Moch. Syaiful; Prifiharni, Siska; Mabruri, Efendi, 2018, "The Effect of Tempering Temperature on Pitting Corrosion Resistance of 420 Stainless Steels", https://hdl.handle.net/20.500.12690/RIN/8LOIJG, RIN Dataverse, V2
The AISI Type 420 stainless steels are commonly used to steam generators, mixer blades, etc. These stainless steels are most prone to pitting in dissolved Cl- containing environments. In this paper, the effect of tempering temperature on pitting corrosion resistance of AISI Type...
May 30, 2018 - Artikel Jurnal Dataverse
Anwar, Moch. Syaiful; Fadillah, Bobby; Nikitasari, Arini; Oediyani, Soesaptri; Mabruri, Efendi, 2018, "Study of Pitting Resistanceof rebar steels in jakarta coastal using simulated concrete pore solution", https://hdl.handle.net/20.500.12690/RIN/TPJH3H, RIN Dataverse, V1
Carbon steels are generally used to a reinforcement in the concrete constructions, such as bridges, piling, etc. These constructionsare not a bit placed in the coastal areas, especially the coastal area of Jakarta. The industrial activities and urban developmentwere a source of s...
Nov 1, 2018 - Artikel Jurnal Dataverse
Anwar, Moch. Syaiful; Fadillah, Bobby; Nikitasari, Arini; Oediyani, Soesaptri; Mabruri, Efendi, 2018, "Study of pitting resistance of rebar steels in jakarta coastal using simulated concrete pore solution", https://hdl.handle.net/20.500.12690/RIN/AIBPMG, RIN Dataverse, V2
Carbon steels are generally used to a reinforcement in the concrete constructions, such as bridges, piling, etc. These constructions are not a bit placed in the coastal areas, especially the coastal area of Jakarta. The industrial activities and urban development were a source of...
Nov 8, 2018 - Artikel Jurnal Dataverse
Purawiardi, R. Ibrahim; Astawa, I Nyoman Gede Putrayasa; Mabruri, Efendi, 2018, "Studi Perubahan Struktur Kristal Material Hasil Perlakuan Equal Channel Angular Pressing Rute Bc dengan Variasi Jumlah Pass: Studi Kasus Sampel Aluminium Paduan 5052", https://hdl.handle.net/20.500.12690/RIN/656FDD, RIN Dataverse, V2
Proses Equal-Channel Angular Pressing (ECAP) merupakan salah satu metode yang digunakan untuk memodifikasi ukuran butir pada logam pejal. Studi ini menganalisis pengaruh jumlah pass pada logam hasil perlakuan ECAP rute Bc, yang dititikberatkan pada perubahan struktur kristal yang...
Oct 30, 2018 - Artikel Jurnal Dataverse
Nikitasari, Arini; Alvina, Faty; Mabruri, Efendi, 2018, "Studi Perbandingan Unjuk Kerja Inhibitor Korosi Baja Beton di Dalam Media Simulasi yang Mengandung Air Laut dan Karbonat", https://hdl.handle.net/20.500.12690/RIN/NDIJOW, RIN Dataverse, V2
Telah dilakukan studi perbandingan mengenai kemampuan peningkatan ketahanan korosi baja beton oleh inhibitor sodium nitrit dan dimethylethanolamine (DMEA) di dalam media larutan beton simulasi terkarbonasi dan terkontaminasi air laut. Tujuan penelitian ini adalah mengevaluasi jen...
Oct 31, 2018 - Artikel Jurnal Dataverse
Lestari, Yulinda; Mabruri, Efendi; Syahrial, Anne Zulfia, 2018, "Studi Pengaruh Variasi Temperatur Heat Treatment Pada Pelapisan SS 410 dengan Komposit Ni-P-Nano Al2O3 Menggunakan Metode Electroless Co-Deposition", https://hdl.handle.net/20.500.12690/RIN/UAJ8OR, RIN Dataverse, V2
Pelapisan material Stainless Steel 410 dengan komposit Ni-P-nano powder Al2O3 menggunakan metode electroless kodeposisi sangat tergantung pada tingkat penggabungan lapisan komposit tersebut antara matriks Ni-P dan penguat nano Al2O3 Hal ini berpengaruh pada keunggulan sifat lapis...
Oct 30, 2018 - Artikel Jurnal Dataverse
Lestari, Yulinda; Mabruri, Efendi; Syahrial, Anne Zulfia, 2018, "Studi Pelapisan Komposit Ni-P-Nano Al2O3 Dengan Metode Electroless Co-Deposition", https://hdl.handle.net/20.500.12690/RIN/AEF06U, RIN Dataverse, V2
Pelapisan material dengan komposit Ni-P-nano powder Al2O3 yang menggunakan metode electroless kodeposisi memiliki keunggulan yaitu prosesnya tidak membutuhkan elektroda, laju deposisi yang cepat dan memiliki ketahanan korosi dan aus yang baik. Pada penelitian ini, parameter yang...
Oct 31, 2018 - Artikel Jurnal Dataverse
Nikitasari, Arini; Fadillah, Bobby; Oediyani, Soesaptri; Mabruri, Efendi, 2018, "Polarisasi Potensiodinamik Baja Beton di Dalam Larutan Simulasi yang Terkontaminasi Air Laut dan Karbonat", https://hdl.handle.net/20.500.12690/RIN/LINOTZ, RIN Dataverse, V2
Korosi merupakan masalah utama pada beton bertulang di wilayah pesisir. Tujuan dari penelitian ini ada dua, pertama untuk mengetahui perilaku korosi baja beton di lingkungan yang terkontaminasi air laut dan karbonat, kedua membandingkannya dengan baja beton dalam larutan yang ter...
Apr 16, 2018 - Prosiding Dataverse
Mabruri, Efendi; Sriyono, Bambang; Adjiantoro, Bintang; Adnyana, D.N, 2018, "Phase Identification and Microstructure of Ni-Ti-Cu and Ni35Ti50Cu10X5 (X= Fe, Sn, Cr, Nb, Co, Mo) Shape Memory Alloys", https://hdl.handle.net/20.500.12690/RIN/QS5E0R, RIN Dataverse, V1
This paper reports the influence of Ni/Ti ratio in Ni-Ti-Cu alloys and of the addition of fourth elements (X) in the Ni35Ti50Cu10X5 (X= Fe, Sn, Cr, Nb, Co, Mo) quarternary alloys on the phases formed and microstructure of the respective alloy. The experimetal results showed that...
Add Data

Sign up or log in to create a dataverse or add a dataset.

Share Dataverse

Share this dataverse on your favorite social media networks.

Link Dataverse
Reset Modifications

Are you sure you want to reset the selected metadata fields? If you do this, any customizations (hidden, required, optional) you have done will no longer appear.

Contact RIN Dataverse Support

RIN Dataverse Support

Please fill this out to prove you are not a robot.

+ =